Mechanical Engineering Lead - Jeff Holloway P. Eng.

• Approximately twenty two years of experience in project management, project engineering, compression application, discipline co-ordination, field engineering, commissioning and start-up of gas transmission and gas processing and gathering facilities. This experience includes system hydraulics, application of compression to gas plants and pipelines, feasibility studies, dense phase pipelines, compressor station design, meter station design, gas plant design, electric driver options, magnetic bearings, dry seals, gas turbines and all other aspects of gas processing and gas pipeline design and construction.
• Notable works include:
  
  Preliminary design and feasibility studies on the Alliance Pipeline in Canada and the USA. This pipeline is a dense phase pipeline designed to transport high liquid content gas at 1740 psi through a 36" pipeline across North America.
  
  Design verification, construction quality control and start-up of the USSR/Turkey Natural Gas Pipeline system. This system included over 700 km of 36 and 24 inch pipeline, 11 large meter stations and one 30 MW compressor station. Experience also in hydraulic analysis of pipeline systems, gas handling equipment selection and the design of mechanical piping systems including piping stress analysis.
  
  A specialist in all sequences involved in project management, design and field services, he has worked on pipeline and facility projects in Canada, USA, Colombia, Finland, Turkey and Australia.

SPECIFIC EXPERIENCE:

PIPELINE TECHNOLOGIES INC. (PTI) 1996 - Present

Project Manager and Facilities Specialist

• Act as project manager for multiple gas compressor stations and gas plant upgrades.
• Provide mechanical engineering requirements for gas plant modifications and cooler additions to mainline gas compression facilities.
• Lead the PTI team in the preparation of the Front End Studies and the Preliminary Facilities Engineering for the Alliance Pipeline Project a 3000 km, 36" dense phase pipeline system.

GAS TRANSMISSION CORPORATION / PTI 1996

Compression Selection and Application Specialist

• Provided technical input for preliminary design and turbine specification and selection to Gas Transmission Corporation of Melbourne, Australia. Project included generation of entire preliminary engineering package for two multi-unit Solar Centaur/Taurus compressor stations.
• Provided design audit on AlintaGas Nuovo Pignone PGT-10 station designs in Perth W.A.
• Generated study for AlintaGas of Perth, Australia comparing compressor selection options and application of various vendor equipment to the short-term expansion and long term growth of AlintaGas’s 1600 km, nine station, 26" pipeline system.
• Reviewed and confirmed Monte Carlo reliability report to determine the outage scenarios, which would affect the system reliability and assess the best path of growth.

WESTCOAST TRANSMISSION / PTI 1995 - 1994

Mech./Process Lead Engineer

• Lead Engineer of 8000 hp Sour Gas Compressor Station for Westcoast Transmission.
• Station includes inlet slugging facilities, condensate stabilisation, fuel gas sweetening, sonic flare system design, large tankage, truck loading, and centrifugal compressors with dry seals running in sour gas.

QUEST - AN ALLIANCE CORPORATION / PTI 1994

Project Manager

• Project Manager / Designer of 4000 hp electrically driven Ariel reciprocating gas compressor station for Amoco Kirby Lake.
• Project Manager / Mechanical Designer of 2500 psig, 12" gas injection pipeline system for Amoco Crossfield.

FOOTHILLS PIPE LINES LTD. / PTI 1992 - 1993

Lead Mechanical Design Co-ordinator

• Responsible for the design and layout of station gas piping and mechanical systems, material specification and requisitioning for a mainline, single unit Cooper RB-211 37,500 hp compressor station located at Monchy, Saskatchewan.
• Included design and layouts of all systems at the compressor station and how the station would perform in conjunction with other facilities on the 36" pipeline system.

ALBERTA NATURAL GAS. / PTI 1992

Project Engineer/Sr. Mechanical Designer

• Hired by ANG and inserted into a small engineering firm to get project back on track after small setbacks in design process.
• Co-ordination of client requirements and overall engineering design with an emphasis on the operational requirements relating to the design of three mainline gas compression station additions for Alberta Natural Gas. Units added were EGT RLM1600’s (18,000 hp).

NOVACORP INTERNATIONAL / PTI 1991

Mechanical Design Audit

• Reviewed and performed Engineering audit on design and layout of four Northern Border compressor Stations.

NOVACORP INTERNATIONAL / PTI 1990 - 1992

Design Co-ordinator /Mechanical Designer

• Responsible for overall design co-ordination for five multi-unit compressor stations utilising Dresser-Rand TCV-10 and TLAD-8 large integral reciprocating gas compression units for the CNG Transmission Corp. of Clarksburg W.V.
• Project Manager and Design Co-ordinator of condensate pumping station located in Southern Alberta.

NOVACORP INTERNATIONAL CONSULTING INC.

Project Supervisor and Technical Quality Control 1989

• Responsible for project supervision and technical quality control of Novacorp revenue projects. Including home office support for large international projects.

NOVACORP - ISTANBUL, TURKEY 1986 - 1988

Mechanical Design/Construction Specialist

• Responsible for mechanical design verification of USSR/Turkey Gas Pipeline system as well as construction inspection and start-up of over 700 km of 36 and 24 inch pipeline, one international receipt point meter station, ten large scale sales stations and a 3 unit, 30 MW gas compression station.

NOVA CORPORATION OF ALBERTA 1981 - 1986

Design Engineer, Facilities Engineering Department

• Responsible for mechanical co-ordination and design for gas transmission compression facilities. This incorporated layout, equipment selection, process design, stress analysis, specifications and inspection of mechanical systems.
• Major Projects include:

HUSSAR COMPRESSOR STATION

Mechanical Co-ordinator

Responsible for mechanical design for major gas piping modifications at 44 MW compressor station consisting of six turbine driven compressor units. Finland Raikkola Compressor Station (for Novacorp).

Mechanical Co-ordinator / Designer

Responsible for complete mechanical design of 8.0 MW pipeline compressor station consisting of three heavy industrial Nuovo Pignone units arranged in a Series/Parallel configuration.

SMOKY LAKE "C" COMPRESSOR STATION

Mechanical Co-ordinator / Designer

Responsible for mechanical design of a 6.1 MW variable speed electric drive gas compression facility.